How you get your Data..

DraconiX · 28.12.2009, 23:07

Hi guys,

first at all, excuse my very bad english

i would like to build a external tachometer on a ATmega. With Speed and rpm display on it.

But i don't get the data out of the game (NFS:S). At the moment i only have the ram position off the actually gear position :/

Can anybody help me?!

thanks and greetings from germany.

e.g.: my email for this prob is: [email protected]

**USSRxInfel8** · 29.12.2009, 06:22

Tell in detail that you wish to make and for what it should be used.

I get data with very big work =)

DraconiX · 29.12.2009, 08:34

Hi infel,

the data (in fact: actualy gearposition, rpm and speed (km/h or m/h)) i would like to view on an external display.

I will get out the data thrue the RS232 or the USB Port to an Atmega32 microcontroller. The rpm i will use as an shift indicator (10 LED's), the Speed and the gear i will shown on a GLCD (128x64) or on a 7 Seg Display (thats acutally not clear, how whats look cooler

).

I draw the circuit diagram for the hardware this day and show it to you.

Of course, i will share the assembly instruction for the hardware with you, and i will get you the source code for the µC, to build your own external display.

I have sitting here for more than five days, and i have only the ram adress for the gearposition... thats very frustating :/ you are my last attempt before i throw my ideas to the garbage.

**USSRxInfel8** · 29.12.2009, 09:42

Hm, and than you do not like the display in game?

Basically, I think that I can help you.
Idea for you interesting though and it is not so clear to do what for to you it =)

DraconiX · 29.12.2009, 10:21

Цитата:

Сообщение от Infel8

Hm, and than you do not like the display in game?

Thats right.

Цитата:

Сообщение от Infel8

Basically, I think that I can help you.
Idea for you interesting though and it is not so clear to do what for to you it =)

The only think i need is the ram position or the position how you get the data out. An API or from an filemap like in GTR2.

The C++ Code for the PC and for the µC write it on my own - i realy only need the data's

Here an pic from the development System:

**USSRxInfel8** · 29.12.2009, 10:27

check e-mail )

DraconiX · 29.12.2009, 10:47

done and thanks

**USSRxInfel8** · 29.12.2009, 11:00

check e-mail again ))

**USSRxV_NMad** · 31.12.2009, 21:03

wow nice ^)

28.12.2009, 23:07	#1
DraconiX Junior Member Регистрация: 28.12.2009 Сообщения: 4	How you get your Data.. Hi guys, first at all, excuse my very bad english i would like to build a external tachometer on a ATmega. With Speed and rpm display on it. But i don't get the data out of the game (NFS:S). At the moment i only have the ram position off the actually gear position :/ Can anybody help me?! thanks and greetings from germany. e.g.: my email for this prob is: [email protected]

29.12.2009, 06:22	#2
USSRxInfel8 Особый статус Регистрация: 08.11.2005 Адрес: Grave Сообщения: 2,524	Tell in detail that you wish to make and for what it should be used. I get data with very big work =) __________________ Честная битва до финиша ,и не сдаваться без весомой причины !! Fair battle to finish ,and do not surrender without heavily reason !! аналог подписи

29.12.2009, 09:42	#4
USSRxInfel8 Особый статус Регистрация: 08.11.2005 Адрес: Grave Сообщения: 2,524	Hm, and than you do not like the display in game? Basically, I think that I can help you. Idea for you interesting though and it is not so clear to do what for to you it =) __________________ Честная битва до финиша ,и не сдаваться без весомой причины !! Fair battle to finish ,and do not surrender without heavily reason !! аналог подписи

29.12.2009, 10:27	#6
USSRxInfel8 Особый статус Регистрация: 08.11.2005 Адрес: Grave Сообщения: 2,524	check e-mail ) __________________ Честная битва до финиша ,и не сдаваться без весомой причины !! Fair battle to finish ,and do not surrender without heavily reason !! аналог подписи

29.12.2009, 11:00	#8
USSRxInfel8 Особый статус Регистрация: 08.11.2005 Адрес: Grave Сообщения: 2,524	check e-mail again )) __________________ Честная битва до финиша ,и не сдаваться без весомой причины !! Fair battle to finish ,and do not surrender without heavily reason !! аналог подписи

29.12.2009, 08:34	#3
DraconiX Junior Member Регистрация: 28.12.2009 Сообщения: 4	Hi infel, the data (in fact: actualy gearposition, rpm and speed (km/h or m/h)) i would like to view on an external display. I will get out the data thrue the RS232 or the USB Port to an Atmega32 microcontroller. The rpm i will use as an shift indicator (10 LED's), the Speed and the gear i will shown on a GLCD (128x64) or on a 7 Seg Display (thats acutally not clear, how whats look cooler ). I draw the circuit diagram for the hardware this day and show it to you. Of course, i will share the assembly instruction for the hardware with you, and i will get you the source code for the µC, to build your own external display. I have sitting here for more than five days, and i have only the ram adress for the gearposition... thats very frustating :/ you are my last attempt before i throw my ideas to the garbage.

29.12.2009, 10:47	#7
DraconiX Junior Member Регистрация: 28.12.2009 Сообщения: 4	done and thanks

31.12.2009, 21:03	#9
USSRxV_NMad Дед маздай без зайцев Регистрация: 24.03.2005 Адрес: Ukraine, Odessa Сообщения: 12,154	wow nice ^)

Здесь присутствуют: 5 (пользователей - 0 , гостей - 5)